439termék
Installation accessory used to help pull RayNet female cables through pipes, chases, and other tight locations. The puller helps to protect the socket connector from damage during installation.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
12 890 Ft
Spur adapters are used to switch between SeaTalk NG and NMEA 2000 DeviceNet cabling, right at the back of a device or at the end of a cable. This makes integrating Raymarine and non-Raymarine components easier no matter which cabling system you are using on your boat.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
12 890 Ft
A cable to connect a SeaTalk NG backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. Available in straight and right angle options.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
12 890 Ft
A cable to connect a SeaTalk NG backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. Available in straight and right angle options.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
12 890 Ft
The SeaTalk NG T-Piece connector is used to create a single spur connection point (white) for a SeaTalk NG compatible display, instrument, sensor or network power cable. Dual blue connections allow the network backbone to pass through to other locations on the boat, or connect to the backbone plus a network terminator.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
12 890 Ft
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to join any 2 backbone cables to each other and make custom length as needed.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
18 090 Ft
In a SeaTalk NG network installation, backbone cables run the length of the boat carrying both data and power to connected sensors and instruments. Backbone cables are available in pre-made 400mm, 1m, 3m, 5m, 9m and 20m lengths. Backbone cables plug into the blue backbone terminals on T-connectors, 5-way connectors and other network devices. You can also use a backbone cable joiner, A06030, to join any 2 backbone cables to each other and make custom length as needed.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
18 090 Ft
RayNet to RayNet right angle adaptor.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
18 090 Ft
SeaTalk NG Spur cables are used to join individual instruments, sensors or displays to the backbone. The white connectors on each cable fit into white spur connectors found in backbone T-connectors and 5-way connectors and provide a secure, waterproof connection. Spur cables are available in 400mm, 1m, 3m, 5m and 6m lengths to reach from your device to the nearest spur connection in the backbone. Spur cables cannot be lengthened or joined together.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
18 090 Ft
SeaTalk NG Elbow spur cables are perfect for use in confined or shallow spaces where a straight spur cable will not fit. Elbow spurs are available in two options: a right angled to right angled (400mm) option, or as right angled to straight spur (1m) option.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
18 090 Ft
Used to connect NMEA 2000-compatible devices to Raymarine's SeaTalk NG backbone. The metal, threaded DeviceNet connector attaches securely to the NMEA 2000 connection, while the white spur connector plugs into a SeaTalk NG spur connection. Available in 120mm, 400mm and 1m length options.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
20 590 Ft
Adapts Raymarine SeaTalk NG instruments and displays to work on a NMEA 2000 DeviceNet network. Plug the white SeaTalk NG spur cable into the socket on your Raymarine instrument, autopilot controller or display. The metal, threaded DeviceNet connector is ready to accept a standard NMEA 2000 DeviceNet drop cable to plug into a NMEA 2000 backbone. Available in 120mm, 1m and 1.5m lengths.
Várható szállítási idő, raktáron nem lévő termék esetén::
5 munkanap
20 590 Ft
439termék